Syringe Shield 3cc:

Introduction:

9 mm thick glass-5.2g/cc gives optimum protection and is easily replaced. Fully exposed needle hub allows you to visually check for correct venous insertion prior to injection.

Weight: Without glass:

2.5cc: 0.3 lbs (0.14kg)

3cc: 0.36 lbs (0.16kg)

5cc: 0.4 2bs (0.19kg)

10cc: 0.62 lbs (0.28kg)

With glass:

3cc: 0.42 lbs (0.19kg)

5cc: 0.53 lbs (0.24kg)

10cc: 0.77 lbs (0.35kg)

Drawing Syringe Shield 3cc

Introduction:

2 mm solid tungsten flange helps shield the hand when withdrawing liquid from a vial. Flange is easily removed to allow transition from drawing dose to patient injection. 9 mm thick glass-5.2g/cc gives the greatest protection of any glass in any syringe shield and is easily replaced. twist-turn and the syringe is held firmly.

Material: tungsten

Weight:

3cc: 0.77 lbs (0.35kg)

5cc: 1.06 lbs (0.48kg)

10cc: 1.5 lbs (0.68kg) 

PETPig Syringe Pig/Syringe Shield

PETPig permits the safe transport and administration of unit dose PET radiopharmaceuticals. The “T”handle on the PETPig cap allows the unit to be easily lifted out of traditional “ammo can” delivery cases. The use of the thermos style handle reduces hand exposure by permitting the PETPig to be carried to the imaging suite without holding container sidewalls. Prior to injection, the base unscrews, allowing the center portion to be used as a syringe shield. When placed in the optional PETPig Cradle, patient administrations can be performed with ease and maximum shielding.
Weight: 15.6 lbs 

PET Dispensing System Syringe Shield 3/5 cc

The PET Syringe Shield magnetically docks with the PET Dispensing Pig .Designed to accept 3cc and 5cc B-D syringes ,it places the needle inside the vial septum when engaged . The external calibration rod allows the precise volume to be withdrawn without a leaded glass viewing port ,where high exposure levels cannot be adequately shielded .