Member Login English Home 中文版 日本語版 BBS Blog
Navigation
Home Page
Tungsten's News
Tungsten's News,International
Tungsten's News,China
Powder Metallurgy Technology
News of Molybdenum
News of Refractory Metals
History of Tungsten
Sports & Tungsten
Military & Tungsten
Environment & Tungsten
Radiation Medical & Tungsten
Marketing of Tungsten
Tungsten Ore
Tungsten Oxides & Trioxides
Tungsten、Carbide Powder
Pure Tungsten
Tungsten Welding Electrodes
Tungsten Heavy Alloy
Tungsten Copper
Tungsten Jewelry
Ferro Tungsten
Tungsten Carbides
Tungsten Alloy Darts
Scrap Tungsten
Tungsten Alloy Bucking Bars
Non-ferrous metals
Molybdenum Related
Nickel Related
Cobalt Related
Vanadium Related
Titanium Related
Rare Earth
Technology of tungsten
Acknowledge of tungsten
Academic of tungsten
Research & Development
Patented Technology
Information Services
Information Offer
Advertising
Translation Services
Agent & Representative
Magazines & Books of tungsten
[Nickel]:Study on the Quality of Ni-based Alloy Light Beam Powder Surfacing
Author:ZHANG Di    Source:Chinese Journal of Lasers    Update Time:2010-1-26 17:35:09

[Nickel]:Study on the Quality of Ni-based Alloy Light Beam Powder Surfacing


In this paper, the influence of surfacing technology and material on the quality of light beam Ni based alloy powder surfacing layer was investigated. In order to acquire surfacing layer of quality, the width of pre coating must be smaller than that of light spot. Too big thickness of pre coating can result in the poor bond between surfacing layer and base metal. While the pre coating is too thin, the macrohardness of surfacing layer decreases obviously owing to high dilution of base metal. By means of multi layer and multi pass lap surfacing, the surfacing layer with big thickness and area can be acquired. The transverse crack in surfacing layer, porosity in bead edge and non fusion between layers are the defects that are liable to produce when multi layer surfacing is used. When multi pass lap surfacing is used, non lap in the toe of weld can arise because of selected moisture. The reasonable control of heat input, cleaning of former weld and good protection of molten.....Details,please contact the auther, editor directly.

研究了堆焊工艺和材料对基合金光束粉末堆焊质量的影响规律。为获得优质堆焊层 ,预涂层的宽度必须小于光斑直径 ,较大的预涂厚度会导致堆焊层与基材结合不良 ,厚度较小时 ,因过高的稀释率使堆焊层宏观硬度显著下降。采用多层焊和多道搭接工艺可获得大厚度、大面积堆焊层。堆焊层横向裂纹、焊道边缘气孔及层间未熔合是多层堆焊时易产生的缺陷。大面积堆焊时 ,焊趾位置会因选择性润湿而出现未搭接。合理控制堆焊线能量、对前道焊缝的清理以及堆焊过程中加强对熔池的保护 ,是获得大厚度、大面积堆焊层的关键。在基合金中加入与其相互润湿的金属陶瓷相 (包WC) ,并控制其加入量可获得无缺陷的、更高硬度的复合堆焊层.

【Key words】 light beam powder surfacing; quality of surfacing layer; Ni based alloy

【关键词】 光束粉末堆焊; 堆焊层质量; 基合金


If you need any more details of the above news and/or products, please visit Chinatungsten Online, or contact us directly.
Disclaimer: The article is only reflecting the opinions of the author. We have no responsibility to prove the originality and authenticity of the content, words and/or pictures. You readers should just take it as reference and check the details by yourselves. And the content is not a suggestion for investment decision. The investor takes his or her own risks if he or she operates accordingly. If you have any dissent about the contents above, please contact the relevant author, or the webmaster. We will try our best to assist the dealing of the related issues. Thanks for your visit and cooperation.

Article录入:yuid    责任编辑:yuid 
  • 上一itemArticle:

  • 下一itemArticle: 没有了
  • 【Font:Small Large】【发表评论】【加入收藏】【告诉好友】【打印此文】【关闭窗口
    Links
    China Tungsten Online Molybdenum Tungsten Wire Tungsten Bars/Rods Tungsten Bucking Bar
    Tungsten Carbides Tungsten Heater Pure Tungsten Tungsten Carbide & Alloy Tungsten Paper weight
    Tungsten Heavy Alloy Tungsten Powder China Dart Wiki of WMo Infosys
    Darts Shop Online f2f.com.cn Xatcm Global InfoMine Stainless Steel Rails
    Sheet Metal Machinery Interactive Investor Link Exchange

    Add to FavoriteAbout CTIAContact UsMore LinksRecruitmentBusiness

    Address: 2-27B,No.261-265 Jiahe RD,Xiamen,Fujian 361009 P.R.China
    Phone:+86 592-5129696,+86 592-5129595;Fax:+86 592-5129797
    Sponsors: China Tungsten Industry Association,Chinatungsten Online
     Certified by MIIT:闽B2-20090025 闽ICP备05002525号
    Copyright © 2000 - 2009 Chinatungsten Online All Rights Reserved