90W-7Ni-3Fe tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. Its ingredient is 90% tungsten、7% nickel and 3% iron. It has a wide array of industries for use in diverse applications. The Properties of 90W-7Ni-3Fe tungsten alloy rod are: Alloy Type: W 90%、Ni 7%、Cu 3% MIL-T-21014: Class 1 SAE-AMS-T-21014: Class 1 AMS 7725 C: 7725 C ASTM B777-87: Class 1 Density: 17.1 g/cc and 0.614 lbs/ in3 Hardness Rockwell: 25 C Ultimate Tensile…

90W-6Ni-4Cu tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. Its ingredient is 90% tungsten、6% nickel and 4% iron. It is Class 1 product of ASTM-B-777 tungsten alloy rod. The Properties of 90W-6Ni-4Cu tungsten alloy rod are: Alloy Type：W 90%、Ni 6%、Cu 4% MIL-T-21014: Class 1 SAE-AMS-T-21014: Class 1 AMS 7725 C: 7725 C ASTM B777-87: Class 1 Density: 17 .1 g/cc and 0.614 lbs/ in3 Hardness Rockwell: 24 C Ultimate Tensile Strength Min:…

W-Ni-Cu tungsten alloy rod is a regular product of our high density tungsten alloys products. W-Ni-Cu is a very important high density tungsten alloy. Compared with steel, W-Ni-Cu has much higher thermal conductivity with much smaller thermal expansion coefficient. Typical applications of W-Ni-Cu tungsten alloy all have relations with the high density, high hardness, or high melting point of these high density tungsten alloys. Examples of major consumer for tungsten alloy are cutting tools, aviation industries and military applications. Chinatungsten…

W-Ni-Fe tungsten alloy rod is a regular product of our high density tungsten alloys products. W-Ni-Fe is a high-density alloy suitable for high-temperature environments and applications such as bearing assembly, ballast, casting, step soldering, and radiation shielding. Properties of W-Ni-Fe tungsten alloy rod : High density (17~18.75g/cm3) High melting point Wear resistance High tensile strength (700~1000Mpa), good elongation capacity Good plasticity and machinability Good thermal conductivity and electrical conductivity Low vapor pressure, excellent thermal stability, small thermal expansion coefficient High…

HD18.5D tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. Its ingredient is 97% tungsten、2.1% nickel and 0.9% iron. It is Class 4 product of ASTM-B-777 tungsten alloy rod. The Properties of HD18.5D tungsten alloy rod are: Density: 18.5 Gms/cc and 0.668 Lbs/ in3 Hardness Rockwell: 28 C Ultimate Tensile Strength: 128,000 PSI Yield Strength(2% offset): 85,000 PSI Elongation: 10 % in 1″ Proportional Elastic Limit: 45,000PSI Modules of Elasticity: 53x 106 PSI…

HD18D tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. Its ingredient is 95% tungsten、3.5% nickel and 1.5% iron. It is Class 3 product of ASTM-B-777 tungsten alloy rod. The Properties of HD18D tungsten alloy rod are: Density: 18 Gms/cc and 0.65 Lbs/ in3 Hardness Rockwell: 27 C Ultimate Tensile Strength: 125,000 PSI Yield Strength(2% offset): 90,000 PSI Elongation: 12 % in 1″ Proportional Elastic Limit: 44,000PSI Modules of Elasticity: 50 x 106…

HD 18 tungsten alloy rod is particularly useful when magnetic permeability may be an issue. Its ingredient is 95% tungsten、3.5% nickel and 1.5% iron. It is Class 3 product of ASTM-B-777 tungsten alloy rod. Although the introduction of copper results in lower tensile strength and ductility, the lack of magnetic properties make them an excellent choice for oncology systems, shielding electrical sensors in applications such as well logging, or rotating inertia members used near guidance systems. The Properties of HD…

HD17.7 tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. Its ingredient is 93% tungsten and the same content of nickel、iron and molybdenum. It has a wide array of industries for use in diverse applications, including highly advanced medical diagnostic equipment and aerospace field. The Properties of HD HD17.7 tungsten alloy rod are: Density: 17 .7 Gms/cc and 0.639 Lbs/ in3 Hardness Rockwell: 30 C Ultimate Tensile Strength: 130,000 PSI Yield Strength(2% offset):…

HD17.5 tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. Its ingredient is 92.5% tungsten、5.25% nickel and 2.25% iron. It is Class 2 product of ASTM-B-777 tungsten alloy rod. The Properties of HD17.5 tungsten alloy rod are: Density: 17 .5Gms/cc and 0.632 Lbs/ in3 Hardness Rockwell: 26 C Ultimate Tensile Strength: 114,000 PSI Yield Strength(2% offset): 90,000 PSI Elongation: 12 % in 1″ Proportional Elastic Limit: 46,000PSI Modules of Elasticity: 47 x 106…

HD17D tungsten alloy rod is manufactured using Chinatungsten Online’ strict quality measures, guaranteeing a consistent, reliable material. Its ingredient is 90% tungsten、7% nickel and 3%iron. It is Class 1 product of ASTM-B-777 tungsten alloy rod. The Properties of HD17D tungsten alloy rod are: Density: 17 Gms/cc and 0.614 Lbs/ in3 Hardness Rockwell: 25 C Ultimate Tensile Strength: 125,000 PSI Yield Strength(2% offset): 88,000 PSI Elongation: 14 % in 1″ Proportional Elastic Limit: 52,000PSI Modules of Elasticity: 45 x 106 PSI…